Getting Heavy Equipment Ready for a Lower Mainland and Fraser Valley Winter

Our winters are more wet than frozen, but cold snaps and outflow winds still stop machines. A checklist to run through before the first one.

Sean Sasges, HD Force MaintenancePublished Updated 3 min read
Komatsu dozer beside an HD Force service truck for field service on site

Winter here is mostly rain, mud and short days, with a few cold snaps. In the Fraser Valley, the outflow winds can drop temperatures fast. Machines that ran fine all fall often fail on the first cold morning. Usually it's the battery, the fuel or a cooling system that hasn't been checked in a year.

Run through this before the first cold snap.

Starting and electrical

  • Load-test the batteries. A battery that's fine in September can fail at -5°C. Clean and tighten the terminals.
  • Check block heaters and grid heaters if the machine has them, and the cords and outlets on site.
  • Lights. With short days, a lot of work happens in the dark. Replace dead work lights and clean the lenses.

Engine and cooling

  • Test the coolant's freeze protection with a tester. Don't just check the level.
  • Inspect the coolant hoses and belts. Cold makes old rubber crack.
  • Check the air filter. Wet weather and mud plug filters faster.

Fuel and DEF

  • Drain the water separator and keep up with it through the winter. Water in fuel causes most winter fuel problems.
  • Keep tanks topped up to limit condensation.
  • DEF freezes at about -11°C. Tier 4 machines have DEF heaters. A heater that has failed shows up as a fault code on the first cold morning. Store spare DEF somewhere it won't freeze or cook.

Hydraulics

  • Warm the machine up as your operator's manual says before working it hard. Cold oil is thick and puts extra load on the pump and hoses.
  • Check the hoses for cracked covers and rubbing. Cold, stiff hoses fail more easily.
  • Check the oil grade suits the temperatures you'll be working in.

Tracks and undercarriage

  • Clean the tracks at the end of each day. Packed mud that freezes overnight can stop a track turning, and forcing it can damage the drive.
  • Check the track tension. Mud packing in tightens a track.

Grease and pins

  • Grease all pins on schedule. Wet, muddy work washes grease out faster, so you may need to grease more often than in summer.

Cab

  • Heater and defrost. A cab you can't see out of is a safety problem.
  • Wipers and washer fluid rated for freezing temperatures.
  • Door and window seals.

Parking

  • Park on firm ground or on mats, not in a hollow where water collects and freezes.
  • Lower attachments to the ground at the end of the day.

Let us do the checklist

We can work through all of this on site during a scheduled service, and catch the parts likely to fail before they do. For fleets and rental yards, we can do several machines in one visit.

Related service

Hourly Preventative Maintenance

Related articles

Book a winter service at your yard or site: call or text 778-789-0035.

Call now
778-789-0035
Text us a photo